The meters are used to measure electrical conductivity value of liquids without temperature compensation function.
Single Point Push-Button Calibration: The meter is permitted to use user-defined calibration
solution, you need only set conductivity value in meter and immerse the electrode into standard solution, then press [CAL] key, the meter will be calibrated automatically.
The meter with hold function, press [HOLD] key, you can freeze reading temporarily for easy viewing.
Replaceable Electrode: with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily.
Auto-Power Off: turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use.
Waterproof Function: The meter with good waterproof performance, It can float when sink in water.
What's included: 1.5V alkaline button cell batteries
8 minutes after last key pressed
3×1.5V alkaline button cell batteries
Approx. 150 hours