One hour auto shut off
130mm. Stainless steel sensor probe
Protective plastic cap for stainless steel probe, pocket clip, stand on back unit & sensor wire compartment
Max/min (°F/°C) memory recalling function
Temperature unit °F/°C selectable
Data hold/test function selectable
1 sec. Normal temperature sensing time
Low battery indicator
Measurement range: -50°C ~ +150°C or -58°F ~+302°F
±1°C in the range of -30°C ~ +150°C
±1.8°F in the range of -22°F ~ +302°F
±1°C in the range of 151°C ~ +250°C, otherwise more than ± 2°C
±1.8°F in the range of 303.8°F ~+482°F, otherwise more than ± 4°F
Unscrew the battery door. Install one "g13" (or equivalent) battery into the battery compartment. Close the battery door.
Replace new battery when the low battery indicator appears on the display.
Press the "on/off" button. All functions will show on the display. The thermometer is ready for use.
Press the "°F/°C" button to select desired measurement
TEMPERATURE ALARM SETTING:
Press the "low al" or "hi al" button for setting alarm at desired low and hightemperature. The digit flashes. The display will show -50°C or -58°F and start to increase up to +150°C or +302°F / +299°C or +572°F.
Release the "low al" or "hi al" alarm set button when the desired temperatureis approached. Press the "low al" button, the "low" sign appears on the left bottom corner. Press the "hi al" button, the "high" sign will be shown. The display value will stop increasing.
After releasing the button for approximately 3 seconds the thermometer will return to the normal mode. The alarm will sound 4 beeps per minute when the measured temperature equals or is greater than the maximum or less than the minimum set value.
Alarm off: to delete the alarm set, press "°F/°C" button.