Code: 000442
Portable EC meter - tester
The meters are used to measure electrical conductivity value of liquids without temperature compensation function.
Single Point Push-Button Calibration: The meter is permitted to use user-defined calibration
solution, you need only set conductivity value in meter and immerse the electrode into standard solution, then press [CAL] key, the meter will be calibrated automatically.
Hold Function:
The meter with hold function, press [HOLD] key, you can freeze reading temporarily for easy viewing.
Replaceable Electrode: with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily.
Auto-Power Off: turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use.
Waterproof Function: The meter with good waterproof performance, It can float when sink in water.
What's included: 1.5V alkaline button cell batteries
Specifications:
Conductivity Range | 0.00~1999 μS/cm |
Conductivity Accuracy | ±1% F.S |
Resolution | 1 μS/cm |
Calibration Points | 1 point |
Calibration Solutions | 1413 μS/cm |
Temperature Coefficient | 2%/oC |
Auto-Off | 8 minutes after last key pressed |
Operating Temperature | 0~60oC |
Non-Volatile Memory | Yes |
Power Requirements | 3×1.5V alkaline button cell batteries |
Battery Life | Approx. 150 hours |
Dimensions | 180(L)mm×30(Dia.)mm |
Weight | 85g |
On Request
